How to assemble IKEA BISSA Shoe Cabinet with 2 Compartments

Step-by-step assembly

1. 

   Step 1

   Screw 10 cam bolts (118331) into the panels.

   3 in each long side panel, 4 in the top panel. Lay the panels on a rug.

   ▶ Watch this step (0:18)

2. 

   Step 2

   Tap 4 pin fittings (10097027) into the side panels.

   Fix each one with a screw 100347.

   ▶ Watch this step (0:25)

3. 

   Step 3 · manual step 3–4

   Push 6 dowels (101350) into the ends of the 3 rails.

   Then stand the rails on the side panel lying on the rug.

   ▶ Watch this step (0:32)

4. 

   Step 4 · manual step 5

   Insert 3 cam locks (118224) and turn them to lock.

   One at the lower end of each rail.

   ▶ Watch this step (0:41)

5. 

   Step 5 · manual step 6

   Lay the other side panel on top of the rails.

   Its cam bolts go into the rail ends.

   ▶ Watch this step (0:48)

6. 

   Step 6 · manual step 7

   Insert 3 more cam locks (118224) and turn them to lock.

   ▶ Watch this step (0:54)

7. 

   Step 7 · manual step 8

   Stand the frame up — upside down.

   The notched ends of the side panels point up.

   ▶ Watch this step (1:00)

8. 

   Step 8 · manual step 9

   Push 4 dowels (101350) into the side panels and set the frame on the top panel.

   ▶ Watch this step (1:06)

9. 

   Step 9 · manual step 10

   Insert 4 cam locks (118224) and turn them to lock the top panel.

   ▶ Watch this step (1:15)

10. 

    Step 10 · manual step 11

    Tap 4 glides (107849) into the side panels with a hammer.

    ▶ Watch this step (1:22)

11. 

    Step 11

    Turn the cabinet over and lay it face down.

    ▶ Watch this step (1:28)

12. 

    Step 12

    Screw the 2 plastic brackets onto a door: 6 screws (112792).

    Lay the door face down.

    ▶ Watch this step (1:34)

13. 

    Step 13 · manual step 13–14

    Slide the widest board into the brackets.

    Fix it with 2 screws (109535).

    ▶ Watch this step (1:42)

14. 

    Step 14 · manual step 15–16

    Slide the narrowest board onto the brackets.

    Fix it with 2 screws (109535). Keep the middle-size board for step 22.

    ▶ Watch this step (1:50)

15. 

    Step 15 · manual step 12–16

    Build the second compartment the same way.

    ▶ Watch this step (1:58)

16. 

    Step 16 · manual step 17–18

    Lower the 2 compartments into the cabinet.

    The brackets go over the pin fittings — check the close-ups in the manual, step 17.

    ▶ Watch this step (2:03)

17. 

    Step 17 · manual step 19

    Lift the cabinet at one end so the compartments settle into place.

    Compare with the drawing in the manual, step 19.

    ▶ Watch this step (2:13)

18. 

    Step 18 · manual step 20

    Fix each compartment with 2 bushings (10095065) and 2 screws (112792).

    Use a hand screwdriver — no power drill.

    ▶ Watch this step (2:19)

19. 

    Step 19 · manual step 21

    Stand the cabinet upright against the wall.

    BISSA must be fixed to the wall to prevent tipping.

    ▶ Watch this step (2:27)

20. 

    Step 20 · manual step 21

    Screw it to the wall: 2 screws (109048) with washers (100823).

    Plugs 121714 suit solid and hollow walls; in solid wood use the screws without plugs.

    ▶ Watch this step (2:33)

21. 

    Step 21 · manual step 22

    Fit the middle-size board in each compartment: 2 screws (109535) each.

    Choose one of the 3 positions shown in the manual, step 22.

    ▶ Watch this step (2:42)

22. 

    Step 22 · manual step 23

    Close the compartments.

    ▶ Watch this step (2:51)