How to assemble IKEA BAGGEBO Glass-Door Cabinet

Step-by-step assembly

1. 

   Step 1

   Lay both frames on the rug. Screw in the 4 feet (10003068).

   One foot into the end of each leg.

   ▶ Watch this step (0:18)

2. 

   Step 2

   Stand both frames up on their edges.

   One frame is turned over first — see the manual, page 8.

   ▶ Watch this step (0:25)

3. 

   Step 3 · manual step 2

   Slide the top panel in between the frames.

   Its edges go into the ends of the top rails.

   ▶ Watch this step (0:30)

4. 

   Step 4 · manual step 3

   Slide the bottom panel in at the leg end.

   Push it in until its holes line up with the frames.

   ▶ Watch this step (0:36)

5. 

   Step 5 · manual step 4

   Lower a perforated side panel into the cabinet.

   Slide it so its holes line up with the holes in the frames.

   ▶ Watch this step (0:42)

6. 

   Step 6 · manual step 5

   Screw 4 shelf supports (10077854) into the panel.

   Use the Phillips screwdriver.

   ▶ Watch this step (0:48)

7. 

   Step 7 · manual step 6

   Lock the panel with 4 clips: sleeve 10050917 + pin 10050916.

   Push each in until it clicks.

   ▶ Watch this step (0:54)

8. 

   Step 8 · manual step 7

   Turn the cabinet over onto its back.

   ▶ Watch this step (1:01)

9. 

   Step 9 · manual step 7

   Fit the second side panel. Screw in 4 shelf supports (10077854).

   Line up its holes with the frames, as before.

   ▶ Watch this step (1:06)

10. 

    Step 10 · manual step 8

    Lock it with 4 more clips (10050917 + 10050916).

    Push each in until it clicks.

    ▶ Watch this step (1:13)

11. 

    Step 11 · manual step 9

    Stand the cabinet upright.

    Then turn it so the open front faces you.

    ▶ Watch this step (1:19)

12. 

    Step 12 · manual step 9

    Slide the back panel in from the front.

    Lock it with 4 clips (10050917 + 10050916).

    ▶ Watch this step (1:25)

13. 

    Step 13 · manual step 10

    Turn the feet until the cabinet stands level.

    Adjust each of the 4 feet up or down as needed.

    ▶ Watch this step (1:33)

14. 

    Step 14 · manual step 11

    To fix it to the wall, place the spacer (114664) behind the back.

    Prepare the spacer first as shown in the manual, step 11 (1–3).

    ▶ Watch this step (1:39)

15. 

    Step 15 · manual step 11

    Screw through the washer (126916) into the wall. Click on the cover.

    Wall screw and plug are not included. Cover: 133303.

    ▶ Watch this step (1:45)

16. 

    Step 16 · manual step 12

    Fit the knob (10062514) to the door with screw 118832.

    The screw goes through the door frame into the knob.

    ▶ Watch this step (1:53)

17. 

    Step 17 · manual step 13

    Push the lower hinge pin (10077811) into the frame.

    Into the hole at the bottom of the front left corner.

    ▶ Watch this step (2:00)

18. 

    Step 18 · manual step 14

    Set the door on the lower pin. Screw in the top pin (10077255).

    It goes down through the top into the door.

    ▶ Watch this step (2:05)

19. 

    Step 19 · manual step 15

    Lay the 2 glass shelves (10077005) on the shelf supports.

    Then close the door.

    ▶ Watch this step (2:13)