IKEA · Bookcases & Shelving

How to Assemble IKEA VESKEN Shelf Unit

Step-by-step IKEA VESKEN shelf unit assembly: 14 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-1842283-5).

  • 14 illustrated steps
  • 12 steps in the manual
  • 2:05 video
  • 36×23×100 cm
IKEA VESKEN Shelf Unit, assembled

What you need

Tools

  • Phillips screwdriver

You’ll need: a pencil and a screwdriver (for the wall screws).

Hardware in the box

Part no. (as printed in the manual)Qty
—4×
—2×

Step-by-step assembly

  1. Step 1: Push the 4 feet up into the corners of the bottom tray. — IKEA VESKEN assembly

    Step 1

    Push the 4 feet up into the corners of the bottom tray.

    Press until each one clicks into place.

  2. Step 2: Set the bottom tray down on its feet. — IKEA VESKEN assembly

    Step 2 · manual step 1

    Set the bottom tray down on its feet.

  3. Step 3: Push 4 posts down into the corners of the bottom tray. — IKEA VESKEN assembly

    Step 3 · manual step 2

    Push 4 posts down into the corners of the bottom tray.

    Press until you hear a click.

  4. Step 4: Press the second tray down onto the 4 posts. — IKEA VESKEN assembly

    Step 4 · manual step 3

    Press the second tray down onto the 4 posts.

    The posts go into the corner sockets under the tray.

  5. Step 5: Click 4 more posts into the corners of the second tray. — IKEA VESKEN assembly

    Step 5 · manual step 4

    Click 4 more posts into the corners of the second tray.

  6. Step 6: Press the third tray down onto the posts. — IKEA VESKEN assembly

    Step 6 · manual step 5

    Press the third tray down onto the posts.

  7. Step 7: Click the last 4 posts into the third tray. — IKEA VESKEN assembly

    Step 7 · manual step 6

    Click the last 4 posts into the third tray.

  8. Step 8: Press the top tray down onto the posts. — IKEA VESKEN assembly

    Step 8 · manual step 7

    Press the top tray down onto the posts.

  9. Step 9: Push the 4 end caps into the corners of the top tray. — IKEA VESKEN assembly

    Step 9 · manual step 8

    Push the 4 end caps into the corners of the top tray.

  10. Step 10: Place the shelf unit against the wall. — IKEA VESKEN assembly

    Step 10 · manual step 9

    Place the shelf unit against the wall.

    To prevent tip-over, it must be fixed to the wall.

  11. Step 11: Mark a line on the wall along the top edge of the top tray. — IKEA VESKEN assembly

    Step 11 · manual step 9

    Mark a line on the wall along the top edge of the top tray.

    Use a pencil.

  12. Step 12: Move the shelf away. Hold the 2 wall brackets on the line and mark the holes. — IKEA VESKEN assembly

    Step 12 · manual step 10

    Move the shelf away. Hold the 2 wall brackets on the line and mark the holes.

    Space them 240 mm apart (centre to centre).

  13. Step 13: Screw each bracket to the wall with 1 screw. — IKEA VESKEN assembly

    Step 13 · manual step 11

    Screw each bracket to the wall with 1 screw.

    Use screws with a flat underside to the head — not countersunk. Screws are not included.

  14. Step 14: Put the shelf back and hook the top tray down onto the brackets. — IKEA VESKEN assembly

    Step 14 · manual step 12

    Put the shelf back and hook the top tray down onto the brackets.

Tips & safety

  • Always fix VESKEN to the wall. Furniture tip-over can cause serious or fatal crushing injuries. Wall screws and plugs are not included — ask a specialist if unsure.
  • Missing a part or unsure about a step? The manual asks you to contact your IKEA store for help.

Official instructions

This guide follows IKEA's official assembly instructions (AA-1842283-5). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More bookcases & shelving guides