IKEA · Bookcases & Shelving

How to assemble IKEA RÅGRUND Shelf Unit

Step-by-step IKEA RÅGRUND Shelf Unit assembly: 10 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-840454-9).

  • 10 illustrated steps
  • 9 steps in the manual
  • 1:56 video
  • 33×28×163 cm
IKEA RÅGRUND Shelf Unit, assembled

What you need

Tools

  • Allen key (included)
  • Phillips screwdriver

You’ll need: the Allen key (100006, in the box), a screwdriver, a pencil and a tape measure.

Hardware in the box

Part no. (as printed in the manual)Qty
13060830×
1284811×
1284812×
1284811×
1000061×

Step-by-step assembly

  1. Step 1: Stand one side frame on its edge and hold the top shelf against it. — IKEA RÅGRUND assembly

    Step 1

    Stand one side frame on its edge and hold the top shelf against it.

    The round foot pads are on the bottom end. The bolt holes with the wide recess face out.

  2. Step 2: Fix the shelf with 2 bolts (130608) and the Allen key. — IKEA RÅGRUND assembly

    Step 2

    Fix the shelf with 2 bolts (130608) and the Allen key.

  3. Step 3: Fit the other 3 shelves with 6 more bolts. — IKEA RÅGRUND assembly

    Step 3

    Fit the other 3 shelves with 6 more bolts.

    Hand-tighten with the Allen key.

  4. Step 4: Fit the second side frame and fix it with 8 bolts. — IKEA RÅGRUND assembly

    Step 4

    Fit the second side frame and fix it with 8 bolts.

    Recessed holes facing out, foot pads at the same end as the first frame.

  5. Step 5: Build the top section: 2 side frames, 3 shelves and 12 bolts. — IKEA RÅGRUND assembly

    Step 5

    Build the top section: 2 side frames, 3 shelves and 12 bolts.

    Same way as before — the recessed side of the holes faces out.

  6. Step 6: Join the two sections with 2 bolts. — IKEA RÅGRUND assembly

    Step 6

    Join the two sections with 2 bolts.

    The bolts go through the top shelf of the lower section into the top section — see the manual, step 6.

  7. Step 7: Carefully stand the shelf unit upright. — IKEA RÅGRUND assembly

    Step 7 · manual step 6

    Carefully stand the shelf unit upright.

  8. Step 8: Place it against the wall and mark the top of the lower section. — IKEA RÅGRUND assembly

    Step 8 · manual step 7

    Place it against the wall and mark the top of the lower section.

    Draw the mark on the wall with a pencil.

  9. Step 9: Fix the strap to the wall 30 mm (1 3/8") below the mark. — IKEA RÅGRUND assembly

    Step 9 · manual step 8

    Fix the strap to the wall 30 mm (1 3/8") below the mark.

    Wall screw not included: use a round-head screw suited to your wall.

  10. Step 10: Screw the strap to the shelf with the washer and screw (128481). — IKEA RÅGRUND assembly

    Step 10 · manual step 9

    Screw the strap to the shelf with the washer and screw (128481).

    Push the unit back first. Use the Phillips screwdriver.

Tips & safety

  • Always fix RÅGRUND to the wall. Furniture tip-over can cause serious or fatal crushing injuries. Wall screws and plugs are not included — ask a specialist if unsure.
  • Heaviest things on the lowest shelves. Never let children climb or hang on the shelves, and never put a TV on the unit.

Official instructions

This guide follows IKEA’s official assembly instructions (AA-840454-9). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Bookcases & Shelving