IKEA · Bookcases & Shelving

How to assemble IKEA OMAR 2 Section Shelving Unit

Step-by-step IKEA OMAR 2 Section Shelving Unit assembly: 11 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2219921-4).

  • 11 illustrated steps
  • 7 steps in the manual
  • 1:43 video
  • 60×25×77 cm
IKEA OMAR 2 Section Shelving Unit, assembled

What you need

Tools

No tools needed.

Hardware in the box

Part no. (as printed in the manual)Qty
100586334×
1005686416×
100568854×
1393461×

Step-by-step assembly

  1. Step 1: Screw a foot (10058633) into the bottom end of each post. — IKEA OMAR assembly

    Step 1

    Screw a foot (10058633) into the bottom end of each post.

    4 posts, 4 feet — turn them in by hand.

  2. Step 2: Snap a pair of clips (10056864) onto each post at the first marking. — IKEA OMAR assembly

    Step 2

    Snap a pair of clips (10056864) onto each post at the first marking.

    Press the two halves together round the post, between two grooves.

  3. Step 3: Stand a shelf on its long edge and push 2 posts into its lower corners. — IKEA OMAR assembly

    Step 3

    Stand a shelf on its long edge and push 2 posts into its lower corners.

    Check which way the shelf faces — see the manual, step 3.

  4. Step 4: Push the other 2 posts through the upper corners. — IKEA OMAR assembly

    Step 4

    Push the other 2 posts through the upper corners.

    Feet toward the same end as the first two.

  5. Step 5: Stand the frame upright on its feet. — IKEA OMAR assembly

    Step 5

    Stand the frame upright on its feet.

  6. Step 6: Snap a pair of clips (10056864) round each post at the top marking. — IKEA OMAR assembly

    Step 6 · manual step 5

    Snap a pair of clips (10056864) round each post at the top marking.

    Each clip fits between two grooves, not across one — see the manual, step 5.

  7. Step 7: Repeat on the other 3 posts. — IKEA OMAR assembly

    Step 7 · manual step 5

    Repeat on the other 3 posts.

  8. Step 8: Lower the top shelf over the posts onto the clips. — IKEA OMAR assembly

    Step 8 · manual step 5

    Lower the top shelf over the posts onto the clips.

  9. Step 9: Press a cap (10056885) onto the top of each post. — IKEA OMAR assembly

    Step 9 · manual step 6

    Press a cap (10056885) onto the top of each post.

  10. Step 10: Push the unit to the wall and loop the strap (139346) round the back rail. — IKEA OMAR assembly

    Step 10 · manual step 7

    Push the unit to the wall and loop the strap (139346) round the back rail.

    The back rail of the top shelf — see the manual, step 7.

  11. Step 11: Screw the strap to the wall. — IKEA OMAR assembly

    Step 11 · manual step 7

    Screw the strap to the wall.

    Wall screws and plugs are not included. Never cut the strap or heat it.

Tips & safety

  • Always fix OMAR to the wall. Furniture tip-over can cause serious or fatal crushing injuries. Use screws and plugs suited to your wall — ask a specialist if unsure.
  • Stacking units? Two high at most. The manual shows two units stacked as OK, three as not allowed — see page 11.

Official instructions

This guide follows IKEA’s official assembly instructions (AA-2219921-4). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Bookcases & Shelving