IKEA · Bookcases & Shelving
How to assemble IKEA LÅNESPELARE Accessories Stand
Step-by-step IKEA LÅNESPELARE Accessories Stand assembly: 5 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2261844-2).
- 5 illustrated steps
- 1 steps in the manual
- 1:10 video
- 17×14×45 cm cm
What you need
Tools
- Phillips screwdriver
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 109504 | 2× |
Step-by-step assembly
Step 1
Lay the stand down with the bottom of the column free.
Rest it on the packaging so the base plate can go on.
Step 2 · manual step 1
Hold the base plate against the bottom of the column.
Countersunk side of the holes facing out — see the detail in step 1.
Step 3 · manual step 1
Screw the plate on with the 2 screws (109504).
Phillips screwdriver.
Step 4 · manual step 1
Check that both screw heads sit flush with the plate.
Step 5 · manual step 1
Turn the stand upright onto its base plate.
Tips & safety
- Plate the wrong way round? The countersunk side of the holes must face out so the screw heads sit flush — see the detail in step 1.
- Missing a part or unsure? Contact IKEA — as shown on page 2 of the manual.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2261844-2). Keep the printed manual to hand — if anything differs, the manual is right.
