How to assemble IKEA VITTSJÖ Nesting Tables

Step-by-step assembly

1. 

   Step 1

   Small table first: push the 2 side pieces onto the end frame.

   They click down over the plugs.

   ▶ Watch this step (0:16)

2. 

   Step 2

   Fix them with 2 screws (117689) and the Allen key.

   ▶ Watch this step (0:23)

3. 

   Step 3

   Lower the leg frame onto the top frame, upside down.

   All 4 legs click onto the plugs in the corners.

   ▶ Watch this step (0:29)

4. 

   Step 4

   Fix each corner with 1 screw (117689).

   4 screws in total.

   ▶ Watch this step (0:37)

5. 

   Step 5

   Screw the 4 adjustable feet into the legs by hand.

   ▶ Watch this step (0:44)

6. 

   Step 6

   Turn the table over and stick 6 pads (107091) onto the ledge.

   Use 3 sheets of pads.

   ▶ Watch this step (0:51)

7. 

   Step 7

   Lay the glass top into the frame.

   Check it is level; turn the feet to adjust.

   ▶ Watch this step (0:59)

8. 

   Step 8

   The small table is done. Now build the large table.

   Manual steps 1–12, pages 10–19.

   ▶ Watch this step (1:05)

9. 

   Step 9 · manual step 1

   Push the 2 long rails onto an end frame.

   Check the hole pattern on the rails — info box, page 10.

   ▶ Watch this step (1:09)

10. 

    Step 10 · manual step 2–5

    Fit 2 angle brackets and fix each with 4 screws (117689).

    2 screws into the leg, 2 into the rail — see steps 2–5.

    ▶ Watch this step (1:17)

11. 

    Step 11 · manual step 6

    Push the second end frame onto the top of the rails.

    Then fit its 2 brackets the same way (steps 2–5, p. 11–12).

    ▶ Watch this step (1:26)

12. 

    Step 12 · manual step 7

    Lower the leg frame onto the top frame, upside down.

    All 4 legs click onto the plugs in the corners.

    ▶ Watch this step (1:35)

13. 

    Step 13 · manual step 8

    Fix each leg with 2 screws (117689) — 8 in total.

    ▶ Watch this step (1:43)

14. 

    Step 14 · manual step 9

    Screw the 4 adjustable feet into the legs by hand.

    ▶ Watch this step (1:51)

15. 

    Step 15 · manual step 10

    Turn the table onto its side and slide the shelf in.

    ▶ Watch this step (1:57)

16. 

    Step 16 · manual step 10 (cont.)

    Fix the shelf with 10 screws (123723) through the tabs.

    Use the Phillips screwdriver.

    ▶ Watch this step (2:05)

17. 

    Step 17 · manual step 11

    Turn the table upright and stick 8 pads (107091) onto the ledge.

    Use 4 sheets of pads.

    ▶ Watch this step (2:13)

18. 

    Step 18 · manual step 12

    Lay the glass top into the frame.

    ▶ Watch this step (2:21)

19. 

    Step 19

    Turn the feet to level the table.

    Check with a level — info box, page 19.

    ▶ Watch this step (2:27)

20. 

    Step 20

    Slide the small table over the end of the large one.

    Its open side fits around the large table.

    ▶ Watch this step (2:33)