IKEA · Tables & Desks
How to Assemble IKEA VITTSJÖ Laptop Stand
Step-by-step IKEA VITTSJÖ laptop stand assembly: 9 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2535083-1).
- 9 illustrated steps
- 4 steps in the manual
- 1:33 video
- 35×55×65 cm
What you need
Tools
- Phillips screwdriver
You’ll need: a Phillips screwdriver.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 122158 / 143131 | 4× |
| 107616 / 107615 | 16× |
| 123741 / 107091 | 3× |
Step-by-step assembly
Step 1
Screw the 4 feet into the base frame by hand.
Lay the base on its side; the feet go into the underside of the rails.
Step 2
Turn the base over onto its feet.
Step 3 · manual step 2
Slide the 4 uprights down into the sockets.
Step 4 · manual step 2
Fix each upright with 2 screws (107616).
Use the Phillips screwdriver — 8 screws in total.
Step 5 · manual step 3
Lower the top frame onto the uprights.
Its 4 stubs slide down into the tubes.
Step 6 · manual step 3
Fix each upright to the frame with 2 screws.
8 screws (107616) in total.
Step 7 · manual step 4
Stick the 6 pads onto the ledge of the frame.
Step 8 · manual step 4
Lay the glass top (138025) into the frame.
Step 9 · manual step 4
Turn the feet to adjust the height if needed.
So the stand doesn’t wobble.
Tips & safety
- Max. load 15 kg (33 lb). Do not place heavy objects on the stand.
- Do not sit on the product. Warning from the manual (p. 2).
Official instructions
This guide follows IKEA's official assembly instructions (AA-2535083-1). Keep the printed manual to hand — if anything differs, the manual is right.
