IKEA · Tables & Desks
How to assemble IKEA VITTSJÖ Coffee Table
Step-by-step IKEA VITTSJÖ Coffee Table assembly: 9 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-517325-11).
- 9 illustrated steps
- 6 steps in the manual
- 1:41 video
- 75×75×45 cm cm
What you need
Tools
- Phillips screwdriver
You’ll need: a Phillips screwdriver and an awl.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 122158 / 143131 | 4× |
| 117494 | 4× |
| 116654 / 10074016 | 4× |
| 107091 / 123741 | 3× |
Step-by-step assembly
Step 1
Lay the ring upside down and fit both leg frames onto it.
The cross-bars slot into each other; each leg slides over a tab on the ring.
Step 2
Fix each leg to the ring with 1 screw (116654).
4 screws in total — use the Phillips screwdriver.
Step 3
Screw the 4 adjustable feet into the legs.
Step 4
Turn the table onto its side.
Step 5 · manual step 4
Slide the shelf in between the legs.
It rests on the two cross-bars.
Step 6 · manual step 4
Fix the shelf with 4 screws (117494) through the cross-bars.
Make a starter hole through each bar hole with an awl, then screw in.
Step 7 · manual step 5
Stand the table upright.
Step 8 · manual step 5
Stick 6 pads (107091) onto the ledge of the ring.
Use the 3 sheets of pads, spaced evenly around the ring.
Step 9 · manual step 6
Lay the glass top into the ring.
It rests on the pads.
Tips & safety
- The glass top is not fixed — it rests on the 6 pads. Lift it off before you move the table or turn it over.
- Missing a part or not sure about a step? Contact your IKEA store (manual page 2).
Official instructions
This guide follows IKEA’s official assembly instructions (AA-517325-11). Keep the printed manual to hand — if anything differs, the manual is right.
