IKEA · Tables & Desks
How to assemble IKEA TORALD Desk
Step-by-step IKEA TORALD Desk assembly: 8 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2292844-5).
- 8 illustrated steps
- 7 steps in the manual
- 1:35 video
- 65×40×75 cm cm
What you need
Tools
- Phillips screwdriver
- Allen key (included)
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 100214 | 10× |
| 101350 | 8× |
| 107716 | 4× |
| 108098 | 2× |
| 153549 | 4× |
Step-by-step assembly
Step 1
Push 8 wooden dowels (101350) into the desktop and shelf.
Lay both panels on the rug — 2 dowels in each end.
Step 2
Fit the desktop and the shelf onto one side panel.
The dowels go into the holes on the inside of the side.
Step 3
Fix them with 5 connector bolts (100214) and the Allen key.
Turn the bolts in through the outside of the side panel.
Step 4
Fit the other side panel and fix it with 5 bolts (100214).
Push the side on over the dowels, then turn the bolts in with the Allen key.
Step 5
Screw the 2 metal rails (10085337) across the back.
4 screws (107716) — one through each rail end into the side panels.
Step 6
Fix the rails with 2 screws (108098).
One screw through each rail — see the manual, step 6.
Step 7
Press the 4 glides (153549) onto the bottom edges of the sides.
Step 8 · manual step 7
Turn the desk upright.
Tips & safety
- Build it on a rug or another soft surface. The manual shows assembling on a rug so the panels don’t get scratched.
- Stuck or missing a part? Contact your IKEA store — the manual shows calling IKEA for help.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2292844-5). Keep the printed manual to hand — if anything differs, the manual is right.
