IKEA · Tables & Desks
How to assemble IKEA TÅNEBRO Side Table
Step-by-step IKEA TÅNEBRO Side Table assembly: 6 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2544040-1).
- 6 illustrated steps
- 1 steps in the manual
- 1:31 video
- 46×46×56 cm cm
What you need
Tools
- Allen key (included)
You’ll need: the Allen key (100092) — it comes in the box.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 10116906 | 8× |
Step-by-step assembly
Step 1
Lay the tabletop upside down on a soft surface.
A rug or the flattened box keeps the top from getting scratched.
Step 2 · manual step 1
Set the first leg against the hub.
Fix it with 2 screws (10116906) and the Allen key.
Step 3 · manual step 1
Fit the second leg the same way.
2 screws per leg, the straight end against the hub.
Step 4 · manual step 1
Fit the third leg.
2 more screws (10116906).
Step 5 · manual step 1
Fit the last leg.
8 screws in total — tighten them all with the Allen key (100092).
Step 6
Turn the table over onto its feet.
Tips & safety
- Delicate table — don’t sit or stand on it. Max. load 10 kg (22 lb); don’t put heavy objects on it (manual p. 2).
- Assemble on a soft surface. Lay the top on a rug or the box so it doesn’t get scratched (manual p. 5).
- Not sure, or a part missing? Contact your IKEA store before you continue (manual p. 5).
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2544040-1). Keep the printed manual to hand — if anything differs, the manual is right.
