How to assemble IKEA SYVDE Dressing Table

Step-by-step assembly

1. 

   Step 1

   Push 4 dowels (101345) into the ends of the back panel.

   2 in each end.

   ▶ Watch this step (0:18)

2. 

   Step 2

   Fit the divider with 2 bolts (100214) through the back panel.

   Tighten them with the Allen key (100001).

   ▶ Watch this step (0:23)

3. 

   Step 3

   Lay it on its back. Screw 2 cam bolts (118331) into the divider.

   One on each face, near the front edge.

   ▶ Watch this step (0:30)

4. 

   Step 4 · manual step 4–5

   Push 4 dowels into the rail ends, then fit the short rail.

   It goes onto the divider’s cam bolt — see the manual, step 5.

   ▶ Watch this step (0:38)

5. 

   Step 5 · manual step 6

   Screw 6 cam bolts (118331) into the two side panels.

   3 in each, on the inside faces.

   ▶ Watch this step (0:46)

6. 

   Step 6 · manual step 7–8

   Fit the right side panel, then the long rail.

   The bolts and dowels slide into the holes.

   ▶ Watch this step (0:52)

7. 

   Step 7 · manual step 9

   Turn the left side panel up onto the frame.

   ▶ Watch this step (1:00)

8. 

   Step 8 · manual step 10

   Insert 8 cam locks (119030) and turn them clockwise.

   4 in the back panel, 2 in each rail.

   ▶ Watch this step (1:05)

9. 

   Step 9 · manual step 11

   Press 4 feet (153548) onto the bottom edges of the sides.

   2 on each side panel.

   ▶ Watch this step (1:12)

10. 

    Step 10 · manual step 11

    Stand the frame upright.

    ▶ Watch this step (1:18)

11. 

    Step 11 · manual step 12

    Screw on the 4 drawer runners with 8 screws (100349).

    Two runner types — see the manual, step 12, for which goes where.

    ▶ Watch this step (1:23)

12. 

    Step 12 · manual step 13–14

    Screw 6 cam bolts into the top. Push 6 dowels into the top edges.

    Lay the top upside down on the rug. Bolts 118331, dowels 101345.

    ▶ Watch this step (1:30)

13. 

    Step 13 · manual step 15

    Turn the top over and lower it onto the frame.

    ▶ Watch this step (1:38)

14. 

    Step 14 · manual step 16

    Insert 6 cam locks (119030) into the top and turn them.

    Use the flat-head screwdriver.

    ▶ Watch this step (1:44)

15. 

    Step 15 · manual step 17–18

    Lay the glass top on, then fit 2 clips (10003193) at the back.

    Fix each clip with a screw (109560).

    ▶ Watch this step (1:51)

16. 

    Step 16

    Now the two drawers.

    Lay the front of the shallow drawer face-down on the rug.

    ▶ Watch this step (2:00)

17. 

    Step 17 · manual step 19–20

    Screw 4 cam bolts (118331) into the front, then fit the sides.

    ▶ Watch this step (2:03)

18. 

    Step 18 · manual step 21

    Insert 4 cam locks (119030) and turn them to lock.

    ▶ Watch this step (2:11)

19. 

    Step 19 · manual step 22–24

    Slide in the bottom. Fit the back with 4 wedge dowels (145718).

    Then lock them with 4 cam locks (119030).

    ▶ Watch this step (2:17)

20. 

    Step 20 · manual step 25

    Turn the drawer upright and fit the knob (10032311).

    Screw 109564 goes in from the inside of the front.

    ▶ Watch this step (2:26)

21. 

    Step 21 · manual step 26–29

    Deep drawer: 4 cam bolts in the front, 8 dowels in the sides.

    Fit the sides and lock them with 4 cam locks (119030).

    ▶ Watch this step (2:33)

22. 

    Step 22 · manual step 30–32

    Slide in the bottom. Fit the back with 4 wedge dowels (145718).

    Then lock them with 4 cam locks (119030).

    ▶ Watch this step (2:42)

23. 

    Step 23 · manual step 33–35

    Turn it upright, fit the knob, the 2 hooks (101512) and the panel.

    See the manual, steps 33–35, for where the hooks go.

    ▶ Watch this step (2:51)

24. 

    Step 24 · manual step 36

    Place the deep drawer on its runners and push it in.

    Pull the runners out first — the drawer clicks on at the front.

    ▶ Watch this step (3:00)

25. 

    Step 25 · manual step 37

    Fit the shallow drawer the same way.

    ▶ Watch this step (3:07)