IKEA · Tables & Desks
How to assemble IKEA STOCKHOLM Coffee Table
Step-by-step IKEA STOCKHOLM Coffee Table assembly: 8 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-716168-2).
- 8 illustrated steps
- 4 steps in the manual
- 1:35 video
- 180×59×40 cm cm
What you need
Tools
- Phillips screwdriver
You’ll need: a Phillips screwdriver.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 109545 | 4× |
Step-by-step assembly
Step 1
Lay the tabletop upside down on a rug.
The soft rug protects the veneer while you work.
Step 2 · manual step 1
Screw the first leg into its fitting by hand.
Hold it at its slant, as the manual shows, and turn it clockwise.
Step 3 · manual step 1
Screw the other 3 legs in the same way.
Step 4 · manual step 2
Turn each leg until it sits tight against the top.
No gap and no thread may show at the fitting.
Step 5 · manual step 3
Lower the rattan shelf in between the legs.
The metal tab at each corner goes against the inside of a leg.
Step 6 · manual step 4
Screw each tab to its leg with a screw (109545).
Use the Phillips screwdriver — 4 screws in total.
Step 7 · manual step 4
Screw in the other 3 screws the same way.
One through the tab at each corner of the shelf.
Step 8
Turn the table over onto its legs.
Your STOCKHOLM coffee table is ready.
Tips & safety
- Assemble on a soft surface. The manual shows a rug or the box under the parts — a hard floor can scratch the veneer.
- Something unclear or missing? The manual says: contact your IKEA store before you continue.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-716168-2). Keep the printed manual to hand — if anything differs, the manual is right.
