IKEA · Tables & Desks

How to assemble IKEA SKOGSTA Table

Step-by-step IKEA SKOGSTA Table assembly: 13 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2223108-1).

  • 13 illustrated steps
  • 13 steps in the manual
  • 2:09 video
  • 160×81×74 cm
IKEA SKOGSTA Table, assembled

What you need

Tools

  • Allen key (included)

You’ll need: only the Allen key (100092) and key handle (121030), included.

Hardware in the box

Part no. (as printed in the manual)Qty
10455814×
1008548×
1013505×
1584544×
1141381×

Step-by-step assembly

  1. Step 1: Push 4 connector pins (158454) into the edge of one tabletop half. — IKEA SKOGSTA assembly

    Step 1

    Push 4 connector pins (158454) into the edge of one tabletop half.

    Lay both halves upside down on a rug first.

  2. Step 2: Push the two halves together. — IKEA SKOGSTA assembly

    Step 2

    Push the two halves together.

    The pins go into the holes in the other half.

  3. Step 3: Push 4 dowels (101350) into the top of the two leg frames. — IKEA SKOGSTA assembly

    Step 3

    Push 4 dowels (101350) into the top of the two leg frames.

    2 in each frame. The leg frames come ready-made.

  4. Step 4: Place both frames upside down onto the tabletop. — IKEA SKOGSTA assembly

    Step 4

    Place both frames upside down onto the tabletop.

    The legs must lean outwards — check the picture in the manual, step 4.

  5. Step 5: Fix the frames with 8 bolts (104558) and 8 washers (100854). — IKEA SKOGSTA assembly

    Step 5

    Fix the frames with 8 bolts (104558) and 8 washers (100854).

    4 per frame. Use the Allen key in the key handle.

  6. Step 6: Fit the long stretcher under the lower rails. — IKEA SKOGSTA assembly

    Step 6

    Fit the long stretcher under the lower rails.

    Fix it with 2 bolts (104558) — one through each rail.

  7. Step 7: Join the two brace pieces with a dowel (101350). — IKEA SKOGSTA assembly

    Step 7

    Join the two brace pieces with a dowel (101350).

  8. Step 8: Fit the brace between the stretcher and the top rails. — IKEA SKOGSTA assembly

    Step 8

    Fit the brace between the stretcher and the top rails.

  9. Step 9: Bolt the brace to the stretcher with 2 bolts (104558). — IKEA SKOGSTA assembly

    Step 9

    Bolt the brace to the stretcher with 2 bolts (104558).

  10. Step 10: Fix both brace ends through the top rails with 2 bolts (104558). — IKEA SKOGSTA assembly

    Step 10

    Fix both brace ends through the top rails with 2 bolts (104558).

  11. Step 11: Press a felt pad (114138) onto the end of each leg. — IKEA SKOGSTA assembly

    Step 11

    Press a felt pad (114138) onto the end of each leg.

  12. Step 12: Tighten the 8 bolts from step 5 once more. — IKEA SKOGSTA assembly

    Step 12

    Tighten the 8 bolts from step 5 once more.

    Use the Allen key in the key handle. Check the washers — see the manual, step 12.

  13. Step 13: Turn the table over — with two people. — IKEA SKOGSTA assembly

    Step 13

    Turn the table over — with two people.

    Lift it over together, as shown in the manual.

Tips & safety

  • Assemble with two people. The tabletop and frames are solid acacia — the manual shows two people, especially for turning the table over.
  • Work on a soft surface. Lay the tabletop face-down on a rug or the flattened box so it doesn’t get scratched.

Official instructions

This guide follows IKEA’s official assembly instructions (AA-2223108-1). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Tables & Desks