How to assemble IKEA PINNTORP Table

Step-by-step assembly

1. 

   Step 1

   Screw a corner bracket (122483) to each end of both short rails.

   2 screws (100325) per bracket — Phillips screwdriver.

   ▶ Watch this step (0:16)

2. 

   Step 2

   Stand the short rails up and screw the long rails to the brackets.

   2 screws (100325) per bracket. The edge with the small holes faces up.

   ▶ Watch this step (0:25)

3. 

   Step 3

   Push 2 dowels (101350) into the top edges of the short rails.

   ▶ Watch this step (0:35)

4. 

   Step 4

   Lay the tabletop face down and set the frame on it, dowels down.

   Turn the frame over so the dowels go into the holes in the tabletop.

   ▶ Watch this step (0:42)

5. 

   Step 5

   Fix the frame to the tabletop with 10 screws (100056782).

   Phillips screwdriver.

   ▶ Watch this step (0:51)

6. 

   Step 6

   Push a cross dowel (110912) into the top of each leg.

   Turn its slot with a flat-head screwdriver so the holes line up with the bolt holes.

   ▶ Watch this step (1:00)

7. 

   Step 7 · manual step 6

   Screw 2 hanger bolts (100033) into each leg.

   They thread into the cross dowel — 8 in all. Legs are marked L and R.

   ▶ Watch this step (1:08)

8. 

   Step 8 · manual step 7

   Fit a leg into each corner, bolts through the bracket.

   L and R legs go in diagonally opposite corners — match the manual, step 7.

   ▶ Watch this step (1:16)

9. 

   Step 9 · manual step 7

   Add a spring washer (100843) and a nut (100712) to each bolt.

   Tighten with the box spanner (120202). The leg must sit flush with the rails.

   ▶ Watch this step (1:26)

10. 

    Step 10 · manual step 7

    Turn the table upright.

    The legs splay out toward the ends of the table.

    ▶ Watch this step (1:36)