IKEA · Tables & Desks
How to assemble IKEA MÖRBYLÅNGA Table
Step-by-step IKEA MÖRBYLÅNGA Table assembly: 11 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-1924803-2).
- 11 illustrated steps
- 8 steps in the manual
- 2:02 video
- 220×100×75 cm cm
What you need
Tools
- Flat-head screwdriver
- Phillips screwdriver
- Hammer
You’ll need: a flat-head and a Phillips screwdriver, and a hammer.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 128745 | 22× |
| 101352 | 4× |
| 101345 | 4× |
| 118331 | 4× |
| 113434 | 4× |
| 117559 | 4× |
Step-by-step assembly
Step 1
Lay both tabletop halves face-down on a rug.
Push 4 thin dowels (101345) into the holes — 2 in each half.
Step 2 · manual step 1
Place a long rail on each half, onto the dowels.
Use the thin dowels (101345) here — not the thick 101352.
Step 3 · manual step 2
Fix each rail with 3 screws (128745).
Tighten with the Allen key (100092) in the key handle (121030).
Step 4 · manual step 3
Screw 2 cam bolts (118331) into each leg frame.
Lay the frames flat, inner side up. Turn the bolts in with the Phillips screwdriver.
Step 5 · manual step 4
Push 2 thick dowels (101352) into each leg frame.
Step 6 · manual step 4
Push the halves together and fit the frames onto the rail ends.
The cam bolts and dowels go into the holes in the ends of the rails.
Step 7 · manual step 5
Insert 4 cam locks (113434) in the rails and turn them to lock.
Make sure the two tabletop halves are flush — no step at the joint.
Step 8 · manual step 6
Screw each frame to the tabletop with 2 screws (128745).
Use the Allen key in the key handle.
Step 9 · manual step 7
Fix the frames with the other 12 screws (128745).
6 in each frame.
Step 10 · manual step 8
Tap a glide (117559) onto the end of each leg.
Use a hammer.
Step 11
Turn the table over — with two people.
Tips & safety
- Assemble with two people. The manual shows two people — the tabletop halves and the frames are big and heavy.
- Work on a soft surface. Lay the tabletop face-down on a rug or the flattened box so the veneer doesn’t get scratched.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-1924803-2). Keep the printed manual to hand — if anything differs, the manual is right.
