IKEA · Tables & Desks
How to assemble IKEA LÄCKÖ Table
Step-by-step IKEA LÄCKÖ Table assembly: 9 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-764510-2).
- 9 illustrated steps
- 6 steps in the manual
- 1:39 video
- 70×70×72 cm
What you need
Tools
- Allen key (included)
- Spanner (included)
You’ll need: the Allen key (100092) and the spanner (108184) — both come in the box.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 120940 | 8× |
| 108264 | 4× |
| 130427 | 12× |
| 123828 | 12× |
Step-by-step assembly
Step 1
Lay the tabletop upside down on a soft surface.
A rug or the flattened box protects the top.
Step 2 · manual step 1
Fit 2 legs onto 2 opposite studs.
Spacer (108264) on the stud, then the leg tab, washer (123828) and nut (130427).
Step 3 · manual step 1
Tighten the 2 nuts (130427) by hand.
As the small picture in step 1 shows — 2×.
Step 4 · manual step 2
Fit the other 2 legs the same way.
Spacer, leg tab, washer and nut on each stud — tighten by hand.
Step 5 · manual step 3
Drop a hub down between the 4 tubes.
All the way down, close to the tabletop.
Step 6 · manual step 4
Fix the hub with 4 bolts (120940), washers and nuts.
Hold each nut with the spanner and tighten with the Allen key.
Step 7 · manual step 5
Drop the second hub in, where the legs start to spread.
Step 8 · manual step 6
Fix it with 4 more bolts (120940), washers and nuts.
Same as step 4: spanner (108184) on the nut, Allen key on the bolt.
Step 9
Turn the table over onto its feet.
Tips & safety
- Assemble on a soft surface. Lay the top on a rug or the box so it doesn’t get scratched (manual p. 2).
- Not sure, or a part missing? Contact your IKEA store before you continue (manual p. 2).
Official instructions
This guide follows IKEA’s official assembly instructions (AA-764510-2). Keep the printed manual to hand — if anything differs, the manual is right.
