How to assemble IKEA IDANÄS Coffee Table

Step-by-step assembly

1. 

   Step 1

   Lay both end frames on the rug. Press in 4 glides (153552).

   One glide in the foot of each leg.

   ▶ Watch this step (0:16)

2. 

   Step 2 · manual step 2–3

   Screw a drawer runner onto each end frame.

   2 screws (100347) per runner. Each frame has its own runner (10044886 / 10044835) — see steps 2–3.

   ▶ Watch this step (0:22)

3. 

   Step 3 · manual step 4

   Screw 8 cam bolts (118331) into the end frames.

   4 in each frame. Turn them in by hand.

   ▶ Watch this step (0:30)

4. 

   Step 4 · manual step 5–6

   Push 4 dowels (101350) into the 2 rails. Stand them up on one end frame.

   Lock them with 2 cam locks (113434) — turn clockwise.

   ▶ Watch this step (0:37)

5. 

   Step 5 · manual step 7–8

   Push 4 dowels into the shelf and 3 into the long back panel.

   Dowels 101350. Lay the shelf upside down on the rug.

   ▶ Watch this step (0:47)

6. 

   Step 6 · manual step 9–10

   Fit the back panel onto the shelf. Screw in 2 cam bolts (118331).

   The dowels go into the holes along the back edge.

   ▶ Watch this step (0:54)

7. 

   Step 7 · manual step 11–13

   Push 1 dowel into the divider. Screw a runner onto each face.

   2 screws (100347) per runner — turn the divider over for the second one.

   ▶ Watch this step (1:01)

8. 

   Step 8 · manual step 14–15

   Stand the divider on the shelf. Lock it with 2 cam locks (113434).

   Its dowel goes into the back panel. Turn the locks clockwise.

   ▶ Watch this step (1:10)

9. 

   Step 9 · manual step 16

   Lower the shelf unit into the frame between the 2 rails.

   Two people. The shelf dowels go into the end frame on the floor.

   ▶ Watch this step (1:18)

10. 

    Step 10 · manual step 17–19

    Fit the back bottom board: 2 dowels, 1 cam lock, 3 screws (100211).

    Lower it in beside the back panel. Tighten the screws with the Allen key.

    ▶ Watch this step (1:27)

11. 

    Step 11 · manual step 20–22

    Push 2 dowels into the lower front rail. Fit it and fix it with 1 screw (100211).

    The screw goes into the divider — Allen key.

    ▶ Watch this step (1:37)

12. 

    Step 12 · manual step 23

    Two people: set the second end frame on top. Lock 5 cam locks (113434).

    Turn them clockwise.

    ▶ Watch this step (1:46)

13. 

    Step 13 · manual step 24

    Two people: turn the table over onto its legs.

    Hold it by the end frame — not by the long rails.

    ▶ Watch this step (1:56)

14. 

    Step 14 · manual step 25–26

    Push 4 dowels into the legs. Fit the top frame.

    Fix it with 10 screws (100211) from below, through the rails — Allen key.

    ▶ Watch this step (2:04)

15. 

    Step 15 · manual step 27

    Lay the glass top (10084501) into the frame.

    ▶ Watch this step (2:14)

16. 

    Step 16

    Now the 2 drawers.

    We’ll build one; the second is the same.

    ▶ Watch this step (2:20)

17. 

    Step 17 · manual step 28–31

    Slide in the drawer bottom, fold up the sides, hook the front on.

    The back and sides come joined. Press the front down until it locks — see steps 28–31.

    ▶ Watch this step (2:24)

18. 

    Step 18 · manual step 32–33

    Clip 2 drawer stops (10047244) underneath. Screw on the knob.

    Knob 10041120, 1 screw (119976) from inside. Build the second drawer the same way.

    ▶ Watch this step (2:33)

19. 

    Step 19 · manual step 34

    Pull the runners out, set each drawer on them and press it down.

    Then push the drawers closed.

    ▶ Watch this step (2:42)