How to assemble IKEA HÄGERNÄS Table and 4 Chairs

Step-by-step assembly

1. 

   Step 1

   Screw a corner bracket (120171) to each end of the two long rails.

   First the table. 2 screws (109067) per bracket — Phillips screwdriver.

   ▶ Watch this step (0:19)

2. 

   Step 2

   Stand the rails on edge and screw the short rails to the brackets.

   2 screws (109067) at each corner — 8 in all.

   ▶ Watch this step (0:27)

3. 

   Step 3

   Lay the tabletop upside down and push in 2 dowels (101350).

   ▶ Watch this step (0:36)

4. 

   Step 4

   Set the frame on the tabletop and fix it with 12 screws (112628).

   The dowels locate it. Phillips screwdriver.

   ▶ Watch this step (0:42)

5. 

   Step 5

   Push a cross dowel (110912) into the top end of each leg.

   Turn its slot with the flat-head screwdriver so the threaded holes face the bolt holes.

   ▶ Watch this step (0:52)

6. 

   Step 6 · manual step 5

   Screw 2 hanger bolts (100037) into each leg.

   They thread into the cross dowel — 8 in all.

   ▶ Watch this step (1:00)

7. 

   Step 7 · manual step 6

   Fit a leg into each corner, bolts through the bracket.

   ▶ Watch this step (1:07)

8. 

   Step 8 · manual step 6

   Add a washer (100843) and nut (100712) on each bolt.

   Tighten the nuts with the box spanner (120202).

   ▶ Watch this step (1:16)

9. 

   Step 9 · manual step 7

   Hammer a glide (107271) into the end of each leg.

   ▶ Watch this step (1:24)

10. 

    Step 10 · manual step 7

    Turn the table upright.

    ▶ Watch this step (1:31)

11. 

    Step 11

    Now the chairs — build all four the same way.

    Chair manual AA-2533333-1. Each chair has its own hardware bag.

    ▶ Watch this step (1:37)

12. 

    Step 12 · manual step 1

    Screw 2 brackets (122620) into each seat rail.

    Turn them in by hand — 4 per chair.

    ▶ Watch this step (1:42)

13. 

    Step 13 · manual step 2

    Lay one side frame down and push 8 dowels (101350) into it.

    ▶ Watch this step (1:49)

14. 

    Step 14 · manual step 2

    Fit the 4 cross pieces, then push dowels into their top ends.

    16 dowels per chair in total.

    ▶ Watch this step (1:57)

15. 

    Step 15 · manual step 3

    Place the other side frame on top and fit 3 bolts (104322).

    Use the Allen key (10083377).

    ▶ Watch this step (2:06)

16. 

    Step 16 · manual step 4

    Turn the chair over and fit 3 bolts on the other side.

    ▶ Watch this step (2:15)

17. 

    Step 17 · manual step 5

    Lay a cloth on a table and set the frame on it upside down.

    The backrest hangs over the edge.

    ▶ Watch this step (2:24)

18. 

    Step 18 · manual step 5

    Drop in the centre stretcher and fix it with 2 bolts (104322).

    ▶ Watch this step (2:32)

19. 

    Step 19 · manual step 6

    Lift the frame, lay the seat face down, and set the frame on it.

    Notched corners at the back; equal overhang at each side.

    ▶ Watch this step (2:41)

20. 

    Step 20 · manual step 7

    Fix the seat with 4 screws (122925) through the brackets.

    Phillips screwdriver.

    ▶ Watch this step (2:50)

21. 

    Step 21 · manual step 7

    Turn the chair upright.

    ▶ Watch this step (2:58)

22. 

    Step 22 · manual step 1–7

    Build the other 3 chairs the same way.

    Repeat chair steps 1–7.

    ▶ Watch this step (3:05)