IKEA · Tables & Desks
How to assemble IKEA GUNDE Folding Table
Step-by-step IKEA GUNDE Folding Table assembly: 7 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2387555-2).
- 7 illustrated steps
- 2 steps in the manual
- 1:38 video
- 67×67×70 cm cm
What you need
Tools
No tools needed.
Hardware in the box
See the manual.
Step-by-step assembly
Step 1
GUNDE comes folded — there is nothing to screw together.
You only unfold it and lock it open.
Step 2 · manual step 1
Stand the folded table up on its feet.
The tabletop hangs down along the legs.
Step 3 · manual step 1
Push the bar down and swing the tabletop up.
Hold the edge of the tabletop with your other hand.
Step 4 · manual step 1
Keep going — the legs open out and the top comes level.
Keep your fingers away from the hinges and locks.
Step 5 · manual step 1
Both locks must click into place (2×).
Each lock slides down the leg until it clicks.
Step 6 · manual step 2
Slide the ring down over the lock.
The ring holds the lock closed.
Step 7 · manual step 2
Do the same with the ring on the other side.
Check that both rings cover their locks.
Tips & safety
- Check both locks before you use the table. Both locks clicked and both rings slid down over them (manual p. 3).
- To fold it, follow manual p. 4. Slide the rings up, lift the bar to release the locks (2×) and fold the top down. Folded, it can lean against a wall.
- Unsure, or something missing? Contact your IKEA store (manual p. 2).
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2387555-2). Keep the printed manual to hand — if anything differs, the manual is right.
