IKEA · Tables & Desks

How to assemble IKEA FRÖTORP Coffee Table

Step-by-step IKEA FRÖTORP Coffee Table assembly: 10 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2264083-6).

  • 10 illustrated steps
  • 9 steps in the manual
  • 1:49 video
  • 88×88×40 cm
IKEA FRÖTORP Coffee Table, assembled

What you need

Tools

  • Allen key (included)

You’ll need: just the Allen key (100092) — it’s in the box.

Hardware in the box

Part no. (as printed in the manual)Qty
124435 / 1125226×
10074074 / 100741936×
1947653×
1185789×

Step-by-step assembly

  1. Step 1: Lay the lower ring on a rug and push the 3 legs into its side holes. — IKEA FRÖTORP assembly

    Step 1

    Lay the lower ring on a rug and push the 3 legs into its side holes.

    The bent end of each leg goes into a hole in the ring.

  2. Step 2: Screw 2 bolts (124435) into each leg — don’t tighten them yet. — IKEA FRÖTORP assembly

    Step 2

    Screw 2 bolts (124435) into each leg — don’t tighten them yet.

    6 bolts in all, through the ring into the legs. Use the Allen key.

  3. Step 3: Lower the top ring onto the 3 legs. — IKEA FRÖTORP assembly

    Step 3

    Lower the top ring onto the 3 legs.

  4. Step 4: Fix it with 2 screws (10074074) per leg and tighten them. — IKEA FRÖTORP assembly

    Step 4 · manual step 3

    Fix it with 2 screws (10074074) per leg and tighten them.

    The screw heads must sit flush with the ring.

  5. Step 5: Now tighten the 6 bolts (124435) in the lower ring. — IKEA FRÖTORP assembly

    Step 5 · manual step 4

    Now tighten the 6 bolts (124435) in the lower ring.

    Use the Allen key — the heads must sit flush.

  6. Step 6: Stick 6 pads (194765) onto the ledge of the lower ring. — IKEA FRÖTORP assembly

    Step 6 · manual step 5

    Stick 6 pads (194765) onto the ledge of the lower ring.

    3 sheets of 2 pads, spread around the ring.

  7. Step 7: Lower the shelf through the top ring onto the pads. — IKEA FRÖTORP assembly

    Step 7 · manual step 6

    Lower the shelf through the top ring onto the pads.

  8. Step 8: Peel off the backing and stick on the 9 strips (118578). — IKEA FRÖTORP assembly

    Step 8 · manual step 7

    Peel off the backing and stick on the 9 strips (118578).

    6 on the ledge of the top ring, 3 over the screw heads.

  9. Step 9: Lift the glass top over the ring — with two people. — IKEA FRÖTORP assembly

    Step 9 · manual step 8

    Lift the glass top over the ring — with two people.

    Check which side faces up: the shiny glass side, see the manual, step 8.

  10. Step 10: Lower the glass top evenly into the ring. — IKEA FRÖTORP assembly

    Step 10 · manual step 9

    Lower the glass top evenly into the ring.

    A second person guides it from below — see the manual, step 9.

Tips & safety

  • Handle the glass top with two people. The manual shows two people lifting and lowering it into the ring (steps 8–9).
  • Missing a part or not sure about a step? The manual says: contact your IKEA store (manual page 2).

Official instructions

This guide follows IKEA’s official assembly instructions (AA-2264083-6). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Tables & Desks