IKEA · Tables & Desks
How to assemble IKEA FEJAN Table
Step-by-step IKEA FEJAN Table assembly: 7 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2290881-2).
- 7 illustrated steps
- 4 steps in the manual
- 1:35 video
- 50×44×70 cm
What you need
Tools
- Hammer
- Allen key (included)
You’ll need: a hammer and a small wooden block. The Allen key (108490) comes in the box.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 10084162 | 8× |
| 157923 | 8× |
Step-by-step assembly
Step 1
Push the short piece into the end of each leg tube.
The narrow end goes into the open tube — 4×.
Step 2
Tap each joint together with a hammer and a wooden block.
The block protects the end of the leg — 4×.
Step 3 · manual step 2
Check that all 4 joints look the same.
The same narrow gap is left at each joint, as the manual shows.
Step 4 · manual step 3
Lay the tabletop upside down on a soft surface.
A rug or the flattened box protects the top.
Step 5 · manual step 3
Push a leg into each corner socket, hole end first.
All the way down — 4×.
Step 6 · manual step 4
Fix each leg with 2 bolts (10084162) and lock washers.
Lock washer (157923) under each bolt, tighten with the Allen key (108490) — 8×.
Step 7
Turn the table over onto its feet.
Tips & safety
- Maximum load 25 kg (55 lb). Don’t put anything heavier on the tabletop (manual p. 2).
- Never sit or stand on the table. It is not made to carry a person (manual p. 2).
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2290881-2). Keep the printed manual to hand — if anything differs, the manual is right.
