IKEA · Tables & Desks
How to assemble IKEA DANDERYD Dining Table
Step-by-step IKEA DANDERYD Dining Table assembly: 9 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2198789-2).
- 9 illustrated steps
- 6 steps in the manual
- 1:47 video
- 130×80×75 cm
What you need
Tools
- Allen key (included)
- Spanner (included)
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 105237 | 10× |
| 10047209 | 4× |
| 100833 | 4× |
| 100843 | 4× |
| 10035912 | 4× |
Step-by-step assembly
Step 1
Lay the tabletop face down.
The manual opens out the box and lays the top on it.
Step 2 · manual step 1
Bolt the 2 long rails onto the top.
3 bolts (105237) per rail — Allen key (100001).
Step 3 · manual step 2
Push a corner plate (10035912) into each end of the long rails.
Step 4 · manual step 3
Slide the 2 short rails onto the corner plates.
Push them in from the ends of the table.
Step 5 · manual step 4
Bolt the short rails to the top.
2 bolts (105237) per rail — Allen key.
Step 6 · manual step 5
Stand a leg in each corner, square block against the rails.
Step 7 · manual step 5
Fit a washer (100833), spring washer (100843) and bolt (10047209).
Through each corner plate into the leg; turn it in with the spanner (128632).
Step 8 · manual step 6
Tighten all 4 leg bolts firmly with the spanner.
See the manual, step 6, for how the washers should look.
Step 9
Turn the table over onto its legs.
Tips & safety
- Assemble on a soft surface. The manual lays the top on the opened box so it doesn’t get scratched.
- Missing a part or unsure about a step? The manual says: contact your IKEA store.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2198789-2). Keep the printed manual to hand — if anything differs, the manual is right.
