IKEA · Tables & Desks
How to assemble IKEA BURVIK Side Table
Step-by-step IKEA BURVIK Side Table assembly: 8 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2445102-1).
- 8 illustrated steps
- 2 steps in the manual
- 1:42 video
- 38×38×78 cm
What you need
Tools
No tools needed.
Hardware in the box
See the manual.
Step-by-step assembly
Step 1
Unpack the tray, the 4 legs and the handle.
Lay the tray upside down on a rug or the flattened box so it doesn’t get scratched.
Step 2 · manual step 1
Screw a leg into one of the holes under the tray.
By hand, turning it clockwise.
Step 3 · manual step 1
Screw a second leg into the opposite hole.
The other two holes stay free for now (see the manual, step 1).
Step 4 · manual step 1
Screw each leg in all the way.
No thread may show between the leg and the tray.
Step 5 · manual step 2
Turn the tray onto its edge.
The two legs now point sideways.
Step 6 · manual step 2
Push the handle into the two free holes.
It goes in from the top side of the tray (see the manual, step 2).
Step 7 · manual step 2
Screw the last 2 legs in from below.
Same holes as the handle ends. Hold the handle and turn each leg clockwise until tight.
Step 8
Stand the table upright.
Tips & safety
- Delicate table: maximum load 10 kg (22 lb). Do not place heavy objects on it (manual p. 2).
- Do not sit on the table. The manual’s warning on page 2.
- Missing a part or not sure? The manual says: contact your IKEA store before you continue.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2445102-1). Keep the printed manual to hand — if anything differs, the manual is right.
