IKEA · Tables & Desks
How to assemble IKEA BROR Work Bench
Step-by-step IKEA BROR Work Bench assembly: 10 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2058806-7).
- 10 illustrated steps
- 6 steps in the manual
- 1:54 video
- 110×55×94 cm
What you need
Tools
- Allen key (included)
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 10042206 | 24× |
| 10050776 | 12× |
| 192249 | 4× |
Step-by-step assembly
Step 1
Push a foot cap onto one end of each leg.
4 plastic caps (192249) — they fit over the angle of the leg.
Step 2
Fit the first leg to the upside-down top shelf.
Shelf on a rug. Bracket 10050776 inside the corner, 2 bolts with the Allen key.
Step 3
Fit the other 3 legs the same way.
A bracket and 2 bolts at each corner.
Step 4
Lower the middle shelf in between the legs.
Upside down — its corners fit inside the leg angles.
Step 5 · manual step 4
Fit 4 brackets and 8 bolts at its corners.
Step 6 · manual step 5
Lower the bottom shelf in near the leg ends.
Same way: upside down, corners inside the legs.
Step 7 · manual step 5
Fit 4 brackets and 8 bolts at its corners.
Step 8 · manual step 6
Turn the work bench over onto its feet.
Step 9 · manual step 6
Tighten all 24 bolts firmly with the Allen key.
Two at each corner of every shelf.
Step 10
The shelves can also sit at other heights.
The manual (p. 3) shows the layouts — the legs have spare holes for them.
Tips & safety
- Assemble it together with a second person. The manual also shows working on a rug to protect the parts.
- Unsure about a step or missing a part? The manual asks you to contact your IKEA store.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2058806-7). Keep the printed manual to hand — if anything differs, the manual is right.
